Step 2
Take the ball, which is approximately 1.5” in diameter, and slightly modify its shape by pressing with your fingers until it forms a body shape that is slightly flattened on the sides. Leave it to dry.
Step 3
Place the red felt ball base on the felting foam, add a small amount of black wool and attach it using the needle felting tool. This will form the underside of the ladybug.
Step 5
Use this technique to add the head of the ladybug. Next, make a strand of black felt
Step 6
Now, add this strand around the head, fixing it with the individual needle. This part will start to look like the head of a ladybug.
Step 7
Use another small strand of black wool to make the central line of the ladybug’s body, jabbing it into the back from the head all the way down the body.
Step 8
Attach the black spots of different sizes, which are so characteristic of ladybugs.
Step 9
Make a hole in the ladybug’s head with a wool needle in the place shown in the picture. Carefully thread a piece of wire right through the hole so that it is poking out on both sides then, shape it with your fingers.
Step 10
Use the scissors to make a cut in the shape of a cross in the stomach of the ladybug and push the sides of it inwards to make a hole.
Step 11
Insert the tip of the tube of fabric glue into the hole and apply a few drop of glue.
Step 12
Lastly, attach the wooden stick and leave to dry completely, as shown in the picture.
Step 13
This tutorial is excerpted with permission from <a href="http://www.schifferbooks.com/felting-5397.html?utm_source=CraftFoxes&utm_medium=Feature&utm_campaign=CraftFoxes_Feltin">"Felting"</a> by Elvira Lopez Del Prado Rivas and published by Schiffer Publishing, Ltd.
