No Sew Boho Scarf Curtains

Pashmina scarf (I like the ones with fringe)
Iron
E-6000 Stitchless Iron-On Glue
Scissors
Masking tape
1/2" yard of matching cotton fabric

Cut each side of the scarf 3 1/2" less than the measurement of your finished curtains
*Example: If your curtain length is 34" then cut the scarf 30 1/2" long
Cut the two pieces of matching cotton that are 9" long and 1" wider than the width of your scarf
Press 1/2" on each of the 9" sides of your cotton fabric
Seal them down with E-6000 Stitchless and press until the moisture is gone

Flip the cotton over to the finished side
Add masking tape 1/2" along one edge
Add E-6000 Stitchless along the masking tape and smoosh it along the tape with your fingers
Place the cotton on the face of the scarf panel
Match the raw edges and iron until the glue evaporates
Flip up the cotton piece and iron along the "seam"
Fold the other edge 1/2" in and iron
Add E-6000 Stitchless along the fold

Fold down on to the first press seam and iron
This will create your tunnel and finish the curtain in the back
Repeat on the other curtain, hang and enjoy!